Flow Control - Jan 2012
new products Tape Liquid Level Indicator Requires No Electricity Madison Companys TL Series Tape Level Indicators are designed for liquid level indication where no electrical power is available A good fit for 30 or 55 gallon remote and mobile tanks these devices incorporate a magnetic float and a standard tape measure blade that is sealed in a liquid tight tube Only the stem and float come in contact with liquid so the tape stays clean and easy to read The retractable steel tape magnetically latches to the level position of the magnetic float The liquid level in the tank is determined by sliding the tape out of the stem tube and reading the aligning graduation mark on the tape when the magnetic interlock is felt The TL Series includes three models brass stem and fitting with a BUNA N float stainless steel stem and fitting with a polypropylene float and a stainless steel stem and fitting with a stainless steel float with total lengths of up to six feet available The level indicators are a good fit for marine applications industrial fire extinguishers chemical drums and underground liquid storage FREE INFO CIRCLE 106 madisonco com pH ORP Sensor With Hot Tap Assembly Sensorexs S656CD Sensor Electrode installed with the S675 Hot Tap Assembly enables pH measurements to be made in pressurized tanks and main lines without having to use stainless steel components It is a good fit for a range of dirty applications for municipal and industrial water wastewater treatment The electrode with the hot tap assembly is typically installed in Acid Neutralization Systems in which pH is monitored prior to discharge of water back into disposal or sewer lines to prevent wear and corrosion of the pipeline The S656CD insertion pH ORP electrode features standard HT gels with four protective pads to reduce pH glass breakage Its flat surface measuring glass design reduces coating and build up in turbulent flows to extend electrode life and reduce technician maintenance activities The S656CD features a measurement range of 0 14 pH 0 12 pH without Na error and the S656CD ORP 2000 mV for ORP The electrode operates a minimum temperature of 50 F 10 C and up to 185 F 85 C depending on the maximum pressure desired up to 80 PSIG The S675 Insertion Assembly uses a one inch full port ball valve to allow installation or removal without system shutdown The insertion assembly can be fully retracted through the ball valve which is then closed isolating the electrode and holder from the pressurized system This is accomplished without draining the tank or de pressurizing the line The S675 Assembly features an adjustable insertion depth which allows the user to position the sensor in a turbulent area of the tank or line to optimize the electrodes self cleaning feature The electrode used in the insertion assembly allows it to be mounted in a variety of positions FREE INFO CIRCLE 107 sensorex com Mini Detented Shuttle Valve for High Pressure Applications The Lee Companys new 375 Detented Shuttle Valve is a good fit for high pressure applications with system pressures up to 5000 PSI Featuring a poppet that latches at either seat to close off the emergency port or the normal port this 037 inch diameter shuttle valve is available in a metal seat version as well as a polymeric seat version for applications requiring zero leakage This miniature valve weighs 12 grams and is 100 percent tested and inspected to ensure reliable consistent performance FREE INFO CIRCLE 108 theleeco com 40 January 2012 Flow Control
You must have JavaScript enabled to view digital editions.
